• Packet into Synchronet?

    From jeronthenet23@VERT/FIVEALRM to All on Sat Nov 21 12:32:14 2026
    Hi everyone, K6JRN here, Georgetown CA (Sierra foothills, El
    Dorado County). Land mobile radio is my day job and amateur radio
    is the hobby that came along with it.

    Enjoyed catching up on the NA6D cable / direwolf thread and the
    ISS SSTV posts. That got me thinking about a project:

    I just brought up a Synchronet board (Five Alarm BBS) and I'd love
    to make it reachable over the air -- 2m AX.25 packet into the BBS,
    the way it used to be done. My rough idea is direwolf as the
    soundcard TNC, then either LinBPQ or a simple AX.25-to-telnet
    bridge handing callers into Synchronet.

    Has anyone here done packet-to-Synchronet? Curious what you'd
    recommend: LinBPQ vs. a lighter gateway, how you handle callsign
    BBS user mapping, and whether 1200 baud is still the sane
    choice on 2m in your area.

    Up here we're hilly and wooded, so I'm also thinking about a digipeater-friendly frequency plan. Any pointers welcome.

    73,
    Jeremiah, K6JRN
    Five Alarm BBS - telnet bbs.k6jrn.net

    ---
    þ Synchronet þ My Brand-New BBS
  • From phigan@VERT/TACOPRON to jeronthenet23 on Sun Nov 22 09:42:07 2026
    Re: Packet into Synchronet?
    By: jeronthenet23 to All on Sat Nov 21 2026 12:32 pm

    to make it reachable over the air -- 2m AX.25 packet into the BBS,

    People love to think and talk about this, but I think the expectations are a little high. Packet BBSes were usually just the built in mailbox functionality of a TNC. You would connect, and it would give you a quick prompt of a few options. You could list messages, read messages, and post messages. You could list the other callsigns that the TNC had heard recently. Sometimes you could jump off of that TNC to a further away one that couldn't hear you directly.

    One time I hooked up an IRC client to packet radio and was somewhat able to use it, albeit very slowly, and it was very text only (using SIC, which I have up on my BBS). I'm not sure a stock "dial-up" BBS like the ones we run for this message network would be good for answering packet. You would have to make a significantly scaled down interface for every aspect (connecting, accepting commands, showing menus, listing and displaying messages, accepting messages, etc), and so much so that it would probably just be worth it to have an entirely separate software for it... like LinBPQ, maybe. If you could make that separate software connect to your Synchronet board via NNTP (or QWK or whatever), then you could have your dial-up BBS messages also be on your packet BBS.

    TheTechPrepper has a packet BBS here somewhat local to me. It's got basically the features of a TNC that I described above, along with the ability to read some news and magazine articles. Very, very simple UI.

    ---
    þ Synchronet þ TIRED of waiting 2 hours for a taco? GO TO TACOPRONTO.bbs.io
  • From ANYBOX08@VERT to All on Sun Nov 22 10:44:40 2026
    Hi Jeremiah!

    Has anyone here done packet-to-Synchronet?

    I've connected my PRBBS (OpenBCM) with my DialIn BBS (Synchronet). At
    first, I've created a PacketRadio friendly shell, but since it's didn't
    worked so well, I've added ANSI support to my PR Client (https:// github.com/andreaspeters/flexpacket). 😅
    Between my PRBBS and the DialIn BBS is not user exchange. So, the User has
    to Login into the Synchronet BBS. And since nobody use it (just me for
    fun) I will not change it.

    73' Andreas (DC6AP).
    --

    <ANYBOX> the OS/2 and Hamradio Synchronet BBS: anybox.freedyndns.de
    YouTube: https://www.youtube.com/@DC6AP
    ---
    ï¿­ Synchronet ï¿­ Anybox BBS (ssh, telnet, dialin) - anybox.freedyndns.de
    â–  Synchronet â–  Vertrauen â–  Home of Synchronet â–  [vert/cvs/bbs].synchro.net